For newbie restorers, one way to show you what you're getting yourself into when restoring a bike from the ground up is to look at the budget and the dates of the receipts -- it's both a financial and time commitment. Below I have detailed what we've spent on the SS180 so far, but please keep in mind I may have another $1,000 in parts to add to this, putting the grand total around $4,700 when all is said and done.
Keep in mind that this dollar amount is okay for a rarer bike, but for less money than this you can buy a great and reliable Vespa or even Lambretta. If you were to invest this type of money in restoring a more common bike you would probably not be able to turn a profit if you sold it.
My goal at this point and hopes are to complete this bike for less $4,500. We'll see what my final parts order ends up costing.
The prices below include taxes and shipping/handling. It is pretty accurate to what we have spent so far on this bike.
---------------------------------------------------------------------
********* PARTS PURCHASED *********
Complete 1967 Vespa SS180 Eric Hughes $250
Engine Cases (mismatched pair) Moto-Rapido $114
PPG $25
Zero Rust (Spray Rust Convert) AutoBodyStore.com $15
Tal-Strip (Aircraft Paint Stripper) (12/06)Advance Auto Parts $29
Engine Parts + Muffler (7/06) ScooterWorks $270
Engine Parts + Carb Rebuild Kit (8/06) ScooterPartsDirect $103
Engine Parts + Cowl Louvres (6) + Steering Column Lock/Key (11/06) ScooterPartsDirect $114
Crank Garners Classic Scooters $175
Kickstart + Clauss Studios Engine Mounts (11/06) SCOMO $140
Brake Shoes + Front Shock Dampner (12/06) Motorsport $55
Tires, Fork Cover, and Front End Rebuild Supplies (1/07)
Motorsport $170
Gear Selector Box (1/07) ScooterPartsDirect $93
Headlamp, Chrome for Fender/Cowls, Gas & Horn Seal (2/07)
Scooterworks $93
SKF Bearings for Front Hub (5/07)Applied Industrial Technologies $24
TOTAL FOR PARTS: $1,670
---------------------------------------------------------------------
********* SERVICES RENDERED *********
Seat reupolstery Dura-Fit Cover, Inc. $159
Sandblast body (4/05) Seibert's Sand Blasting $106
Piston bore Moto-Rapido $109
Engine rebuild Moto-Rapido $300
Powdercoat shroud and fan cover Moto-Rapido $25
Carb rebuild Moto-Rapido $25
Stator/electrical wiring (includes parts) Moto-Rapido $55
Powdercoat (3) rims Moto-Rapido $50
Paint forks Moto-Rapido $50
Powdercoat shock and hubs Moto-Rapido $50
Powdercoat kickstand Moto-Rapido $25
Paint & Body Work K & K Autobody $1,060
Gas Tank Restore (12/06) Smitty Radiator Service $50
TOTAL FOR SERVICES RENDERED: $2,064
---------------------------------------------------------------------
***** GRAND TOTAL (6/07): $3,734 *****
Thursday, June 28, 2007
Reassembly slated to begin
Well the Vespa was moved to, my buddy's, Ted Witmer's, shop for reassembly. This is the first time either of us have put a Vespa back together. Heck, I didn't even take it apart as I bought in pieces. Ted has rebuilt the front end for me, including the shock and the engine was rebuilt by Christopher Markley and body painted by K&K. So all that is left is putting the beast together. I have one more big order to place and I am working on a final parts list. I suspect I have about $400-800 more in parts to finish the bike.
My family and I are going home for the summer (I'm from S.F. and my wife from Portland, OR) and won't be back until September; therefore the project will begin in the early Fall. Plus my wife freelances so it all depends on what our income when we return as we may need close to a $1,000 to finish this bike up. My goal is to have the bike road ready before Spring starts. Also, I really want to get started on restoring my 1962 Lambretta TV175, which I will rebuild the engine on first and build another blog.
Here's the general outline for reassembly flow, per recommendation from Christopher Markley:
-- Set up two sawhorses and cover them with towels. Put frame on sawhorses.
-- Install fork.
-- Install cables.
-- Install centerstand.
-- Install rear shock top mount, and let bottom dangle.
-- Put scooter on floor, with auto jack stand
under rear end. Slide engine under frame, have assistant steady the frame.
-- Install engine swing arm to frame.
-- Pivot engine up and attach shock to rear
engine mount.
-- Install tire-mounted rim to hub.
-- Lower frame so scoot sits on its two tires.
-- Proceed with rest of job.
-- Voila!
I will post an updated "budget" to what we've spent so far and when I get my final parts list together I will post that too.
I hope this blog continues to be interesting and helpful for you.
My family and I are going home for the summer (I'm from S.F. and my wife from Portland, OR) and won't be back until September; therefore the project will begin in the early Fall. Plus my wife freelances so it all depends on what our income when we return as we may need close to a $1,000 to finish this bike up. My goal is to have the bike road ready before Spring starts. Also, I really want to get started on restoring my 1962 Lambretta TV175, which I will rebuild the engine on first and build another blog.
Here's the general outline for reassembly flow, per recommendation from Christopher Markley:
-- Set up two sawhorses and cover them with towels. Put frame on sawhorses.
-- Install fork.
-- Install cables.
-- Install centerstand.
-- Install rear shock top mount, and let bottom dangle.
-- Put scooter on floor, with auto jack stand
under rear end. Slide engine under frame, have assistant steady the frame.
-- Install engine swing arm to frame.
-- Pivot engine up and attach shock to rear
engine mount.
-- Install tire-mounted rim to hub.
-- Lower frame so scoot sits on its two tires.
-- Proceed with rest of job.
-- Voila!
I will post an updated "budget" to what we've spent so far and when I get my final parts list together I will post that too.
I hope this blog continues to be interesting and helpful for you.
Subscribe to:
Posts (Atom)